Filters
United States (42)
ALBERTI GERARDI (2)
BRETON (1)
CLAUSING (1)
CNC (2)
COLCHESTER (1)
DECKEL (1)
EX-CELL-O (1)
FADAL (1)
FANUC (2)
FLEX-E-ON (1)
More…
Sort By
FADAL - VMC-8030HT Vertical Machining Center (Two Available)
Vertical Machining CentersStock #: 4039
Used - Good
80.0in
X
30.0in
Y
30.0in
Z
22.5hp
Power
80.7in
X
35.4in
Y
28.0in
Z
20.0hp
Power
Used Breton Matrix 800 K/25 5 Axis High Speed CNC Gantry Type Machining Center
Vertical Machining Centers (5-Axis or More)Used - Good
5 Axis CNC Gantry Type
78.7in
X
98.4in
Y
31.5in
Z
5.0
# Axis
Model: A77 (630 mm pallets) Pallet: Pallet Size: 24.8" x 24.8" (630 mm) Pallet Indexing: 0.001 degree Number of Pallets: 2 Maximum Load On Pallet: 2,000 LBS Travels: X-Axis Travel: 31.5" Y-Axis T...
31.5in
X
29.5in
Y
30.3in
Z
--
Power
31.5in
X
29.5in
Y
30.3in
Z
--
Power
Used 98” Precision Straight Edge 98”x1.5”x6” Includes storage box
Used Mitsubishi CNC 5 Axis Wire EDM
31.5in
X
23.6in
Y
20.1in
Z
--
Auto Threading (Yes/No)
HAAS VF-0 Vertical Machining Center (less than 200 hours!)
Vertical Machining CentersStock #: 4037
Used - Excellent
20.0in
X
16.0in
Y
20.0in
Z
20.0hp
Power
CNC Lathe with Manual Controls.
20.0in
Swing
30.0in
Machining Length
2.0
# Axis
8.0in
Chuck Size
Used twin spindle CNC Lathe
--
Swing
--
Machining Length
2.0
# Axis
8.0in
Chuck Size
Used twin spindle, gantry load CNC lathe
Georges Renault/Desoutter Twin 5200 Controller Display and Chicago Motor and Torque Tools
Twin 5200 Controller and Chicago Pneumatic Motor and Torque ToolsUsed - Good
Used Georges Renault/Desoutter Twin 5200 Controller Display Model 8034F Serial Number 97E00305 110V/1.6kVA 50/60 Hz Includes Machine Key Used 2 Georges Renault/Chicago Pneumatic Electric Torque ...
very good used.2 Available
very good used condition
AC Input: 240V 17 Amps 60Hz. 3 Phase DC output: 18 V. 300Amps 5.4 KW Cont. Duty
Stone Cutting Saw with flexible shaft hydraulic drive cutting head.
460 V 3 phase 60 Hz total Amp 30 150 PSIG Max "Muscle Unit"
Manual hand crank with precision dial 17 3/4” DiameterTable 8 T-Slot Table Lock down Lever Grease fitting lube
Used Fanuc 7M Control System (Removed from Makino MC 100 Machining Center
This machine has been run under power. It is operational , however, not at full capacity due to missing solenoid and other small parts. It needs some TLC. 1/2 HP 60 Cycle 3 Ph 480 V
Box of 17 Flex-E-On Collets specific to Flex-E-On Chucks. Various sizes.
10 HP 1800rpm 3 phase 60 Hz Max spindle speed 40-1600 rpm distance between centers: 78" Swing over bed: 19-1/4" spindle speed -12 swing across slide: 12-1/4" Spindle speed range: 40-1600 Spindle si...
19.0in
Swing
78.0in
Centers
2.27in
Spindle Bore
7.5hp
Power
Rack Cutter/Shaper Tooling In 10 Drawer Cabinet. Approximately 300 rack cutters + other tooling Maag, Parker etc rack cutters Approximately 44”x 30”x 28” Listing is for cabinet and all tooling...
Used Slide Way Single Axis Hydraulic Unit Manufacturer: Holloway Dimensions: Table: 24in x 12inBase: Travel 13 in, Distance Across Ways 9.25in, Way Width 2in Vickers Hydraulic Valve Flame Ha...
Used. Deckel S0/62-4543 Tool Sharpener/Grinder with Cabinet and Accessories
S0/62-4543 Tool Sharpener with Cabinet and AccessoriesUsed - Good
Used ETS. Friedr. Deckel Vaduz Tool Sharpener/Grinder S0/62-4543 With Cabinet, Hardware and Accessories. Item is sold with cabinet and hardware. Tool sharpener can be used without the cabinet. Pe...