Vertical Machining Centers (5-Axis or More)
5 Axis CNC Gantry Type
Engine Lathes
3 axis Fanuc Servo Motor Slideway Unit on Wing Base
10” x axis travel 10” y axis travel 10” z axis travel 2 fanuc servo motors Mounting Surface: 9”x24” Hardened and ground ways
Single Axis Hydraulic Slide Unit on Wing Base
Single axis hydraulic slide unit on wing base. 12” x axis travel Mounting surface: 9”x24’ flame hardened and ground ways
Gap Lathes
Stock #: 4043
Stock #: 4053
DMG DMU 50 - LOW HOURS 9,575 Machine Hours with only 5,717 Cutting Hours Sold in 2018
Vertical Machining Centers
Stock #: 4039
Robots
Used Fanuc Robot Model M-6i Type A05B-1210-B602 with Fanuc Teach Pendant, Fanuc Transformer, Fanuc Control Box and 3 Banner Mini Beam Photoelectric Sensors E-04443 #R00475727 Date: 2000 .04 T...
Heavy Duty Motorized Linear Slideway Unit
Stock #: 4027
3 HP with gearbox on the slideway linear axis. Table longitudinal Motorized Travel:72”. One center Keyway. Overall length: 176” Slideway and drive. Table top to floor: 17 1/8 Table size: 60”x76...
Gleason Cutter Sharpener #14292
Used Gleason Cutter Sharpener #14292
3 Axis Fanuc Servo Motor Slide Unit on Wing Base
3 axis Holloway 12” x axis travel 10” z axis travel 10”z axis travel 2 fanuc servo motors Mounting surface: 9”x 24’ Flame hardened ground ways
single axis slideway Unit
Used Slide Way Single Axis Hydraulic Unit Manufacturer: Holloway Dimensions: Table: 24in x 12inBase: Travel 13 in, Distance Across Ways 9.25in, Way Width 2in Vickers Hydraulic Valve Flame Ha...
CNC Lathes
Stock #: 4044
Vertical Machining Center
Drilling & Tapping Centers
Stock #: 4042
Gear Cutter Sharpeners
Stock #: 8
Maag WS-2 Rack Cutter Sharpener #4888 with Toolbox of over 300 Rack Cutters Primary Voltage: 240/480V Secondary: 120/240V 60 Hz .150 kVp 10 drawer Toolbox: 44"x30"x28" Maag, Parker Rack Cutters and...
Machinist spot Facing and Centering Lathe
Used spot facing and centering lathe. 10” in between lathe centers. 5.5” center height. Air feed on each hypo pneumatic head. Comes with 2 boxed standard rods. 230/460V 5 HP 60Hz 10" between lather...
Stock #: 4050
Stock #: 4051
Centerless Grinders
Stock #: 00007
MICRON CNC CENTERLESS GRINDER Model: MD-C-RT-SA-7 (1996) `````````````````````````` Wheel 205 mm wide 11 kW Fanuc
Wire EDM
Used Mitsubishi CNC 5 Axis Wire EDM
Stock #: 4033
Used twin spindle CNC Lathe
Stock #: 4032
Used twin spindle, gantry load CNC lathe
CNC 5 Spindle Live Milling Turret Head
Stock #: 16
CNC 5 Spindle Station Live Milling Turret Head 4000RPM 26 kw 700 Nm max torque Cast iron angular contact ball bearings
Vacuum Furnaces
Stock #: 4045
Forklift Trucks/Order Picker
Stock #: 4047
Hours: 12,708 Includes Battery This item has been inspected and tested by Raymond in Feb 2023 and is in good operating condition. does not include battery charger.
This machine has been run under power. It is operational , however, not at full capacity due to missing solenoid and other small parts. It needs some TLC. 1/2 HP 60 Cycle 3 Ph 480 V
Industrial Heavy Duty Single Axis Slideway Unit with Fanuc Servo Motor. There are 3 units available Way Dimensions: Way width: 4.5” Height: 2” Length from way to way: 20” Distance between the ways...
Industrial Heavy Duty CNC 2 Axis Slideway Unit with Fanuc Motor
Industrial Heavy Duty 2 Axis Slideway Unit with Main Drive Fanuc Motor