Filters
Country
Sort By
Select option
2003 FADAL VMC-8030HT Vertical Machining Centers | Tartan American Machinery Corp.
80.0in
X
30.0in
Y
30.0in
Z
22.5hp
Power
COLCHESTER MASCOT 1600 Engine Lathes | Tartan American Machinery Corp.
20.0in
Swing
78.0in
Centers
3.066in
Spindle Bore
--
Power
CLAUSING 600 Engine Lathes | Tartan American Machinery Corp.
--
Swing
--
Centers
--
Spindle Bore
7.5hp
Power
1993 JOHNFORD VMC - 2020 Vertical Machining Centers | Tartan American Machinery Corp.
80.7in
X
35.4in
Y
28.0in
Z
20.0hp
Power
BRETON MATRIX 800 K/25 Vertical Machining Centers (5-Axis or More) | Tartan American Machinery Corp.
5 Axis CNC Gantry Type
78.7in
X
98.4in
Y
31.5in
Z
5.0
# Axis
1996 MAKINO A77 Horizontal Machining Centers | Tartan American Machinery Corp.
Model: A77 (630 mm pallets) Pallet: Pallet Size: 24.8" x 24.8" (630 mm) Pallet Indexing: 0.001 degree Number of Pallets: 2 Maximum Load On Pallet: 2,000 LBS Travels: X-Axis Travel: 31.5" Y-Axis T...
31.5in
X
29.5in
Y
30.3in
Z
--
Power
1996 MAKINO A77 Horizontal Machining Centers | Tartan American Machinery Corp.
31.5in
X
29.5in
Y
30.3in
Z
--
Power
Straight Edge Precision Straight Edge 98” Steel Straight Edge | Tartan American Machinery Corp.
Used 98” Precision Straight Edge 98”x1.5”x6” Includes storage box
MITSUBISHI EDM MV4800 Wire EDM | Tartan American Machinery Corp.
Used Mitsubishi CNC 5 Axis Wire EDM
31.5in
X
23.6in
Y
20.1in
Z
--
Auto Threading (Yes/No)
1998 HAAS VF-0 Vertical Machining Centers | Tartan American Machinery Corp.
20.0in
X
16.0in
Y
20.0in
Z
20.0hp
Power
2013 HAAS TL-1 CNC Lathes | Tartan American Machinery Corp.

Haas TL-1 Tool Room Lathe

CNC Lathes
Stock #: 4034
Used - Good
CNC Lathe with Manual Controls.
20.0in
Swing
30.0in
Machining Length
2.0
# Axis
8.0in
Chuck Size
2010 MURATEC MW120 CNC Lathes | Tartan American Machinery Corp.
Used twin spindle CNC Lathe
--
Swing
--
Machining Length
2.0
# Axis
8.0in
Chuck Size
2012 MURATEC MW400 CNC Lathes | Tartan American Machinery Corp.
Used twin spindle, gantry load CNC lathe
Georges Renault 5200 Twin Controller Twin 5200 Controller and Chicago Pneumatic Motor and Torque Tools | Tartan American Machinery Corp.
Used Georges Renault/Desoutter Twin 5200 Controller Display Model 8034F Serial Number 97E00305 110V/1.6kVA 50/60 Hz Includes Machine Key Used 2 Georges Renault/Chicago Pneumatic Electric Torque ...
EX-CELL-O 118408 Spindle | Tartan American Machinery Corp.
1200 RPM
ALBERTI GERARDI MCU-1,5 Live Tools | Tartan American Machinery Corp.
very good used.2 Available
ALBERTI GERARDI KR-2313 Live tooling | Tartan American Machinery Corp.
very good used condition
KANTO SEIKI Oilmatic Temp Regulator Temperature Regulator | Tartan American Machinery Corp.
Kanto Seiki Oilmatic temperature Control Regulator
Rapid Power Technologies C31578 DC Power Supply | Tartan American Machinery Corp.
AC Input: 240V 17 Amps 60Hz. 3 Phase DC output: 18 V. 300Amps 5.4 KW Cont. Duty
Stone Cutting Saw 50HP Stone Cutting Saw | Tartan American Machinery Corp.
Stone Cutting Saw with flexible shaft hydraulic drive cutting head.
STERLCO Sterl-Tronic M8425-G2X Temperature control system | Tartan American Machinery Corp.
460 V 3 phase 60 Hz total Amp 30 150 PSIG Max "Muscle Unit"
Societe Genevoise P1-5 Rotary and Tilting Table | Tartan American Machinery Corp.
Manual hand crank with precision dial 17 3/4” DiameterTable 8 T-Slot Table Lock down Lever Grease fitting lube
HAAS VM-3 Vertical Machining Centers | Tartan American Machinery Corp.

HAAS VM-3

Vertical Machining Centers
Stock #: 4031
Used - Excellent
40.0in
X
26.0in
Y
25.0in
Z
30.0hp
Power
1981 FANUC A028-0041-B008 CNC Control Center | Tartan American Machinery Corp.
Used Fanuc 7M Control System (Removed from Makino MC 100 Machining Center
SNOW 2-DR-2-A Drilling & Tapping Centers | Tartan American Machinery Corp.
This machine has been run under power. It is operational , however, not at full capacity due to missing solenoid and other small parts. It needs some TLC. 1/2 HP 60 Cycle 3 Ph 480 V
FLEX-E-ON JDC1335 Flex-E-On Collets  | Tartan American Machinery Corp.
Box of 17 Flex-E-On Collets specific to Flex-E-On Chucks. Various sizes.
LEBLOND MAKINO REGAL SERVO-SHIFT Engine Lathes | Tartan American Machinery Corp.
10 HP 1800rpm 3 phase 60 Hz Max spindle speed 40-1600 rpm distance between centers: 78" Swing over bed: 19-1/4" spindle speed -12 swing across slide: 12-1/4" Spindle speed range: 40-1600 Spindle si...
19.0in
Swing
78.0in
Centers
2.27in
Spindle Bore
7.5hp
Power
MAAG Rack cutters and toolbox Rack Cutters | Tartan American Machinery Corp.
Rack Cutter/Shaper Tooling In 10 Drawer Cabinet. Approximately 300 rack cutters + other tooling Maag, Parker etc rack cutters Approximately 44”x 30”x 28” Listing is for cabinet and all tooling...
Holloway Single Axis Hydraulic Slideway Unit single axis slideway Unit  | Tartan American Machinery Corp.
Used Slide Way Single Axis Hydraulic Unit Manufacturer: Holloway Dimensions: Table: 24in x 12inBase: Travel 13 in, Distance Across Ways 9.25in, Way Width 2in Vickers Hydraulic Valve Flame Ha...
DECKEL S0/62-4543 Tool Sharpener with Cabinet and Accessories S0/62-4543 Tool Sharpener with Cabinet and Accessories | Tartan American Machinery Corp.
Used ETS. Friedr. Deckel Vaduz Tool Sharpener/Grinder S0/62-4543 With Cabinet, Hardware and Accessories. Item is sold with cabinet and hardware. Tool sharpener can be used without the cabinet. Pe...