Equipment

Stock #: 4053

DMG DMU 50 - LOW HOURS 9,575 Machine Hours with only 5,717 Cutting Hours Sold in 2018

Stock #: 4051

Stock #: 4050

Stock #: 4049

Stock #: 4047

Hours: 12,708 Includes Battery This item has been inspected and tested by Raymond in Feb 2023 and is in good operating condition. does not include battery charger.

Stock #: 4045

Stock #: 4044

Stock #: 4043

Stock #: 4042

Used Fanuc Robot Model M-6i Type A05B-1210-B602 with Fanuc Teach Pendant, Fanuc Transformer, Fanuc Control Box and 3 Banner Mini Beam Photoelectric Sensors E-04443 #R00475727 Date: 2000 .04 T...

Stock #: 4039

Vertical Machining Center

5 Axis CNC Gantry Type

Used Mitsubishi CNC 5 Axis Wire EDM

Stock #: 4033

Used twin spindle CNC Lathe

Stock #: 4032

Used twin spindle, gantry load CNC lathe

This machine has been run under power. It is operational , however, not at full capacity due to missing solenoid and other small parts. It needs some TLC. 1/2 HP 60 Cycle 3 Ph 480 V

Used Slide Way Single Axis Hydraulic Unit Manufacturer: Holloway Dimensions: Table: 24in x 12inBase: Travel 13 in, Distance Across Ways 9.25in, Way Width 2in Vickers Hydraulic Valve Flame Ha...

Industrial Heavy Duty 2 Axis Slideway Unit with Main Drive Fanuc Motor

Used spot facing and centering lathe. 10” in between lathe centers. 5.5” center height. Air feed on each hypo pneumatic head. Comes with 2 boxed standard rods. 230/460V 5 HP 60Hz 10" between lather...

3 axis Holloway 12” x axis travel 10” z axis travel 10”z axis travel 2 fanuc servo motors Mounting surface: 9”x 24’ Flame hardened ground ways

Single axis hydraulic slide unit on wing base. 12” x axis travel Mounting surface: 9”x24’ flame hardened and ground ways

10” x axis travel 10” y axis travel 10” z axis travel 2 fanuc servo motors Mounting Surface: 9”x24” Hardened and ground ways

Industrial Heavy Duty Single Axis Slideway Unit with Fanuc Servo Motor. There are 3 units available Way Dimensions: Way width: 4.5” Height: 2” Length from way to way: 20” Distance between the ways...

Stock #: 4027

3 HP with gearbox on the slideway linear axis. Table longitudinal Motorized Travel:72”. One center Keyway. Overall length: 176” Slideway and drive. Table top to floor: 17 1/8 Table size: 60”x76...

Delco E2 Motor 1770 rpm 3 phase 15 hp 60Hz Insul B Cont duty Code G vacuum pump with spare vacuum chamber

Used Super wood builders 5 mode wood working machine. 4100 RPM includes extra tooling and hardware this machine performs the following: table sawing, disc sanding, drilling, boring, lathe turning. ...